Cart 0
PR250 Epinamel Olive Green Universal Epoxy Undercoat Part A 4Ltr

PR250 Epinamel Olive Green Universal Epoxy Undercoat Part A 4Ltr

$114.20 $152.26

THIS PRODUCT IS FLAMMABLE AND MAY REQUIRE ADDITIONAL SHIPPING CHARGES. PLEASE CALL FOR DETAILS 07 5574 5811

Description:

  • a universal two pack adhesion promoting, polyamide cured
  • epoxy primer
  • approved to APAS-2971
  • conforms to AS/NZS 3750.13 Type 2 and 3
  • FDA Food Contact Compliant (refer below)


Principal Characteristics:

  • general purpose epoxy primer in protective coating systems for steel and non-ferrous metals
  • excellent adhesion to steel, galvanized steel, non-ferrous metals and fibreglass
  • excellent flow and wetting properties
  • excellent water and corrosion resistance
  • cures at temperatures down to +5°C
  • suitable for touching up of weld seams and damages of epoxy coatings during construction
  • long recoating intervals are possible when overcoating with
  • epoxy and polyurethane coatings
  • can be overcoated with most alkyd, chlorinated rubber, epoxy, two component polyurethane and catalysed acrylic coatings
  • suitable on wet blast cleaned substrates (damp or dry)
  • suitable primer for immersion systems (in fresh and salt
  • water) when applied over suitably prepared surfaces
  • suitable with well designed cathodic protection systems
  • suitable for use as a prefabrication primer (Olive Green
  • only) (refer to Technical Data Sheet P30.07 for details)
  • cure with Epinamel EH100 standard hardener or Epinamel
  • EH120 low temperature hardener

Key Brands