Cart 0

Epinamel Eb600 - Clear Part A 20 Ltr

$396.85 $529.13

THIS PRODUCT IS FLAMMABLE AND MAY REQUIRE ADDITIONAL SHIPPING CHARGES. PLEASE CALL FOR DETAILS 07 5574 5811

Description

  • two part high build polyamide-cured recoatable epoxy maintenance coating
  • EH100 is suitable Part B
  • approved to APAS-2973 (solid and micaceous iron oxide colours)
  • conforms to AS/NZS 3750.14
  • FDA Food Contact Compliant (refer below)

Principal Characteristics

  • easy application, both by airless spray and brush
  • unlimited recoatability
  • general purpose epoxy build or finish coat for steel and
  • concrete structures exposed to atmospheric conditions
  • can be recoated with various two component and conventional coatings even after long weathering periods
  • tough, with long term flexibility and excellent durability
  • will cure at temperatures down to -5 �C although curing rate is reduced
  • can be applied under high relative humidity conditions up to maximum of 95%
  • excellent adhesion to suitably prepared aged epoxy coatings
  • resistant to water and splash of mild chemicals
  • heat resistant up to 200 �C. (MIO version only)

    Refer to Wattyl Protective and Marine Coatings System Guide for system details.

    BASIC DATA AT 25 �C
    solids content............................approx. 65% by volume
    mix ratio .................................4A:1B by volume
    typical film thickness (per coat)......100 - 150 microns(dry), 155 - 230 microns(wet)
    theoretical spreading rate ............6.5m �/l for 100 microns(dry), 4.3 m �/l for 150 microns(dry)
    touch dry after...........................2 hours
    overcoating interval.....................refer to overcoating table for details
    full cure after............................4 days
    shelf life (cool and dry place).........at least 12 months


    Key Brands