Cart 0
Epinamel EB600 - Clear Part A

Epinamel EB600 - Clear Part A

$138.75 $185.01

Description

  • two part high build polyamide-cured recoatable epoxy maintenance coating
  • EH100 is suitable Part B
  • approved to APAS-2973 (solid and micaceous iron oxide colours)
  • conforms to AS/NZS 3750.14
  • FDA Food Contact Compliant (refer below)

Principal Characteristics

  • easy application, both by airless spray and brush
  • unlimited recoatability
  • general purpose epoxy build or finish coat for steel and
  • concrete structures exposed to atmospheric conditions
  • can be recoated with various two component and conventional coatings even after long weathering periods
  • tough, with long term flexibility and excellent durability
  • will cure at temperatures down to -5°C although curing rate is reduced
  • can be applied under high relative humidity conditions up to maximum of 95%
  • excellent adhesion to suitably prepared aged epoxy coatings
  • resistant to water and splash of mild chemicals
  • heat resistant up to 200°C. (MIO version only)

    Refer to Wattyl Protective and Marine Coatings System Guide for system details.

    BASIC DATA AT 25°C
    •solids content............................approx. 65% by volume
    •mix ratio .................................4A:1B by volume
    •typical film thickness (per coat)......100 - 150 microns(dry), 155 - 230 microns(wet)
    •theoretical spreading rate ............6.5m²/l for 100 microns(dry), 4.3 m²/l for 150 microns(dry)
    •touch dry after...........................2 hours
    •overcoating interval.....................refer to overcoating table for details
    •full cure after............................4 days
    •shelf life (cool and dry place).........at least 12 months


    Key Brands