West System 207 Special Coating Hardener (3:1)
THIS PRODUCT IS FLAMMABLE AND MAY REQUIRE ADDITIONAL SHIPPING CHARGES. PLEASE CALL FOR DETAILS 07 5574 5811
Part A SoldÂ Separately
West Epoxy Resin (Part A)
Special coating hardener used with West 105 Resin (3 Resin:1 Hardener)
Blush-free 207 Special CoatingÂ Hardener was developed for coating and fiberglass cloth application where an clear, moisture-resistant, natural wood finish is desired. Blended withÂ 105 Epoxy Resin,Â 207 Hardener will not blush or turn cloudy in humid conditions. Thin film applications roll out and tip off smoothly, requiring less sanding in preparation for finish coatings.
Professional and first-time builders like 207 Special CoatingÂ Hardener because it is reliable, easy to use, as does not blush. Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, the final coating can be sanded the following day. Boats can be built faster. Builders also appreciate the excellent fiberglass wet-out characteristics achieved with 105 Resin / 207 Special CoatingÂ Hardener, yet it wonâ€™t drain from vertical surfaces like the very slow curing, low-viscosity epoxies.
105 / 207 Epoxy has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special CoatingÂ Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish.
Mix Ratio:Â 3 parts resin : 1 part hardener
Pot life at 72Â°F (22Â°C):Â 20 to 26 minutes
Cure to a solid state:Â 10 to 15 hours
Cure to maximum strength:Â 4 to 7 days
Minimum recommended temperature:Â 60Â°F (16Â°C)
500 ml : 160 ml
1 litre : 330 ml