Water Based Timbermate Wood Filler - 2kg
Timbermate Wood filler is an Interior grade 4 in 1 Woodputty, Grainfiller, Edgefiller and Crackfiller.
When thinned slightly with water can also be used as a sanding sealer. Timbermate does not shrink, sink, crack or fall out and has an indefinite shelf life. It is non-flammable, non-toxic and can be used to the last gram. The secret ingredient of Timbermate is tap water therefore containing no Acrylic, Latex or Solvents.
Timbermate comes in 13 premixed colours plus Natural Tint Base. Timbermate takes all types of known stains, varnishes and coatings. The Timbermate formula is over 85 years old and is the only genuine water-based formula in the world proving that the formulation has stood the test of time.
TIMBERMATE wood filler can be stained with all types of colorants, e.g. waterbased, oilbased and spirit stains and oxides.
TIMBERMATE can be sealed with all known types of top coats e.g. waterbased Tung oil, single pack and two pack Polyurethane varnishes.
SANDING SEALER: Add approximately 10% - 15% water and mix until desired consistency is achieved.
FILLING LARGER HOLES: Fill in layers approximately 6mm at a time and allow to dry between each application.
COLOURING: TIMBERMATE can be coloured by mixing prior to application or when dried, with all colorants.
STAINING FLOORS: To achieve the best match choose a colour to match floor, sand and stain floor when putty is dry.
DRYING: TIMBERMATE dries in about 30 minutes depending on temperature and depth of fill. TIMBERMATE'S drying time can be reduced by placing heaters and fans in the room.
SANDING: TIMBERMATE is ready to sand when fading of colour occurs
MIXING: In colder climates TIMBERMATE hardens in the tub, to soften simply place in the sun or stand in a tub of hot water. When thinning hot water provides the best results.